Enter email for Turbo Manifold info, codes and new products!



HACKER SAFE certified sites prevent over 99% of hacker crime.
You are here: Home > :::: Catch Cans
Sort By:
Page of 1
Neukin Oil Catch Can
Neukin Street Oil Catch Can
Our Price: $95.00
Sale Price: $59.00
You save $36.00!

Summer Special!

Helps catch oil fragments that exit the valve cover. Two -10an bungs on top for inlet and one -6an on bottom for drain. This unit features a 1.3" (35mm) filter tube/inlet. Filter is twist lock our own design to lower weight, lower height and look cleaner. The twist lock filter can be used to open the oil catch can fast and check fluid depth or collection so you know when you empty. Basic baffle inside to direct oil down adn prevent splash upward on filter if road racing or the like. Made in Indiana USA

For more hardcore race applications its normal to weld two bungs to the valve cover. Those bungs unless custom are none baffled. These bungs will catch alot of oil. If you are going this route you will want the race catchcan as its volume is larger and ment for more airflow.
Neukin Race Oil Catch Can
Neukin Race Oil Catch Can
Our Price: $159.00
Sale Price: $129.00
You save $30.00!

Summer Sale!

Helps catch oil fragments that exit the valve cover. The stock bung on the valve cover is normally baffled to prevent oil from exiting. Sometimes even if you use the stock valve cover breather hole oil fragments will exit and enter the intake or exit on your engine or ground depending on your setup.

This is the original race oil catch can. As the years went by we have so many requests for changes or additions. If you order without mods it comes as pictured and your good to go. If you want changes.... You can add a small note like "Drain on front" add notes then add to cart. Options like a extra bung on top can be selected. -12an is desired now so iv added that as a option and it costs more for the larger bungs bought in a lower volume then the -10 i stock.. the fab is different too as i have to cut the hole larger for the 12an. Thanks and good luck out there!

This if for hardcore race applications its normal to weld two bungs to the valve cover. Those bungs unless custom are not baffled. These bungs will catch alot of oil. If you are going this route you will want the race catchcan as its volume is larger and intended for more airflow. Has bracket welded on back for easy install or new version with threaded bungs on back. Does not come with Neukin logo on front or top.
+$120 and it comes complete with: -10an fittings on top (2)-10an bungs for valvecover that you needed welded on -6an fitting on bottom for drain -6an cap for drain (2) 3ft sections of stainless line for -10 (4) -10 push on fittings for line (two 90 -10an push on fittings and two straight)