|
|
|
|
|
|
Neukin Nissan RB Top Mount
|
Our Price: $1,300.00
|
|
|
In the testing phase.
-Collector for either open T3 or T4 turbos
-Single wastegate
-Fits RB25DET and RB26DETT heads
|
|
|
|
|
|
|
|
|
|
|
|
|
Neukin SR20det Bottom Mount Turbo Manifold
|
|
Our Price: $650.00
|
|
|
Shorter Runners, less weight, good for under 500whp and drops turbo low for better car center of gravity thus handling. Turbo, manifold and downpipe stay farther from brake system keeping it cooler then your style. Drift inspired. Non ac and requires Neukin power steering mount on chassis left side. Lowering the PS will allow cooler PS fluid temps (away from manifold both ours and stock/others), better direct intake tube, and better center of gravity with weight lower. (neukin ps bracket kit sold separately)
|
|
|
|
|
|
|
|
|
|
|
|
|
Neukin Nissan KA Bottom Mount
|
|
Our Price: $650.00
|
|
|
Shorter Runners, less weight, good for under 500whp and drops turbo low for better car center of gravity thus handling. Turbo, manifold and downpipe stay farther from brake system keeping it cooler then your style. Drift inspired. Non ac and requires Neukin power steering mount on chassis left side. Lowering the PS will allow cooler PS fluid temps (away from manifold both ours and stock/others), better direct intake tube, and better center of gravity with weight lower. (neukin ps bracket kit sold separately)
|
|
|
|
|
|
|
|
|
|
|
|
|
Neukin Nissan SR20det Turbo Manifold
|
|
Our Price: $795.00
|
|
|
Longer runners and lower angle merge collector. Better for over 450-500whp.
|
|
|
|
|
|
|
|
|
|
|
|
|
Neukin Nissan KA24de Turbo Manifold
|
|
Our Price: $795.00
|
|
|
Longer runners and lower angle merge collector. Better for over 450-500whp.
|
|
|
|
|
|
|
|
|
|
|
|
|
Nissan S13 V Mount Kit
|
|
Our Price: $1,199.00
|
|
|
Was $1795 now with redesign less custom we can produce easier. Ships in under 3 weeks or $100 back
The Neukin S13 Vmount system is one of the most desirable setups for boost. Doesnt matter if your Drifting, Road Racing, Time Attack, SCCA, NASA, Drag, or getting the groceries. The 14" of intercooler pipes force boost into the motor at a alarming rate making it incredibly responsive. Overheating is a thing of the past... daily driving in 60dF air temp coolant kept about 145dF. There is cutting needed, usually a cut off wheel on air hose is best or a dremal with dremal cut off wheels. Must remove front bumper support and foam. Once you have installed your kit you will see that working on your car is fun again. The setup was designed to be so easy to work with... it will blow your mind. There is nothing stopping you from doing easy engine swaps or changing parts.
Neukin S13 Vmount VIP: If you damage any part while racing you will get a replacement at 50% off when sending the damaged unit in.
Recent drift event: KA turbo with two 10" fans running car stayed at 187dF in staging, the SR S13 with one 12" fan running stayed cooler even with front bumper off, rad warm to touch not hot and stock gauge stayed under 50%. Intercooler much cooler on outlet endtank. Zero problems on all three neukin cars thus far.. over 1 year of testing on real tracks and events. KA turbo is daily driver thus slow speeds and no problems vmount.
-Neukin Intercooler (Garrett bar/plate core 12x18 700HP) BOV flange welded on end tank - THis IC was DESIGNED for VMOUNT used in all our v-mount kits
-Neukin Massive Radiator (Double pass 22x19 core)
-Brackets and frame work needed to install
-Intercooler pipes, couplers, and Tbolts. (designed for neukin bottom mount manifold and uses inline MAF)
-Radiator hoses and Clamps
-Sparco Hood pins and latch
-Louver for stock hood
-Hardware and everything else needed to install in about 1hr if baller
-Inline coolent fill coupler point (you will have two caps in this kit one stays on rad at most times and the up high mount will allow fill through whole system
-No power headlights (must manually fix them to our anchor system when needed - less weight tho?! ha)
-No stock hood latch
-No hood webbing/goo
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Neukin 240sx 4 Point Cage
|
|
Our Price: $400.00
|
|
|
4 Point cage made with the finest 1.75" DOM .120 wall steel tube. The hoop comes complete with a welded (TIG) in one piece diagonal and a two piece harness bar for driver and passenger. The two rear bars are notched on hoop side and extend just right to connect to rear strut tower. No plates are provided since its basic and extra weight but can be added. You can buy material from a local metal store for about $10 but then they need cut. Usually ships UPS for about $100-150 depending.
|
|
|
|
|
|
|
|
|
|
|
|
|
Neukin KA/SR Power Steering Bracket
|
|
Our Price: $150.00
|
|
|
Neukin Nissan PS Bracket kit lowers the PS pump to the AC/PS mount points on a KA or SR. The two are different so pick your correct options. This is required for the Neukin bottom mount manifold (costs less with manifold). Designed for Drift and Roadrace applications. Works with stock high pressure line but should be replaced if racing for bursting and fire reasons (line could be 20 years old) There are 2 main gains. One is the lower pump operation temp by removing it from the stock location close to the turbo manifold. The lower position also allows more air circulation. The second is the weight is also lowered in the chassis as far as position, every bit helps. With the turbo, manifold and PS all lower you benefit with a lower center of gravity. The bracket weight is lower then the stock cast bracket. If you ask "does this work with AC?" you should take up chess or something.
-Neukin Nissan 240sx Power Steering Bracket
-New low pressure line
-Quality hardware (bolts, nut and stainless lock washers)
-New Belt
|
|
|
|
|
|
|
|
|
|
|
|
|
Neukin KA Catch Can
|
|
Our Price: $150.00
|
|
|
Neukin Nissan KA Catch Can
Mounts on stock two bolt holes on chain cover. Holds 240+ml max is close to 380ml. Built in baffle on filter side catches more oil and keeps any slosh from going out filter. Compact design easy to work around and keep bay clean. 1/8npt drain on bottom.
Custom bungs and requests can be made just email for your build at a extra cost.
-Filter and clamp 1" inlet
-5/8 tube with two clamps
-Quality hardware (bolts, nut and stainless lock washers)
|
|
|
|
|
|
|
|
|
|
|
|
|
Nissan 240sx welded Diff
|
|
Our Price: $130.00
|
|
|
Neukin Nissan Welded Differential
Nothing special here but the brute welding and Neukin touch. Special rod is used for TIG welding and plates added for super strength. The convenience of us having these instock and ready to ship.
$60 refunded when your stock good condition diff shows.. we will only refund $40 if you need us to locktight and impact your final drive gear from your stock diff onto our welded diff.
We also sell KAaZ for those that want SAN2655 2-WAY
|
|
|
|
|
|
|
