Enter email for Turbo Manifold info, codes and new products!



HACKER SAFE certified sites prevent over 99% of hacker crime.
You are here: Home > :::: Precision Turbos
Choose a sub category:
Precision Turbo Entry Level Section




Below is our impressive very high end turbo line up from Precision Turbo. These are just the most popular and powerful, contact us for more turbos if you dont see what your after.
Competition Engineered Aerodynamics (CEA): Precision Turbo now offers high tech "billet" CNC-machined 2618-forged aluminum compressor wheels specifically designed for greater efficiency. These result in faster transient response or less turbo lag than traditional cast wheels. CEA wheels are making significantly more power!
Sort By:
Page of 2
Precision Turbo 5557
Precision Turbo 5557

Thrust bearing PT5557 turbocharger for about 495hp but this increases to 570hp with the CEA billet wheel and ball bearing as efficiency goes up. Great for 1.5-2.5L lower power goals so you have good power throughout the rpm range. Pick Group B Turbines

Precision Turbo has a wide range of turbos to pick from. 5557 is 55mm cold side wheel with 57mm turbine hot side wheel. Larger wheels =more lag but higher air volume flow rates. The correct wheel size (= flow rate and spool rate) and your turbine AR (picked based on where you want your power in the band and engine displacement) The turbos are basically like Garrett units with advanced modifications from Precision Turbo here in Indiana. They cast alot of the compressor covers and turbine housings allowing lower prices and better performance. Prices start at about $825 and go up with billet wheels or ceramic ball bearing options. You will get a card you can send in for a standard 1yr warranty.  We are 2 hours from Precision right here in Indiana, if you want us to match a price for you just shoot us a email about the competitions offer.

Click Here to View a turbine choice sheet based on your group
Precision Turbo 5757
Precision Turbo 5757

Thrust bearing PT5757 turbocharger for about 540hp - great for 1.5-2.5L lower power goals so you have good power throughout the rpm range. Pick Group B Turbines

Precision Turbo has a wide range of turbos to pick from. 57 57 is 57mm cold side wheel with 57mm turbine hot side wheel. Larger wheels =more lag but higher air volume flow rates. The correct wheel size (= flow rate and spool rate) and your turbine AR (picked based on where you want your power in the band and engine displacement) The turbos are basically like Garrett units with advanced modifications from Precision Turbo here in Indiana. They cast alot of the compressor covers and turbine housings allowing lower prices and better performance. Prices start at about $825 and go up with billet wheels or ceramic ball bearing options. You will get a card you can send in for a standard 1yr warranty.  We are 2 hours from Precision right here in Indiana, if you want us to match a price for you just shoot us a email about the competitions offer.

Click Here to View a turbine choice sheet based on your group
Precision Turbo 5857
Precision Turbo 5857

Thrust bearing PT5857 turbocharger for about 570hp but this increases to 605hp with the CEA billet wheel and ball bearing as efficiency goes up. Great for 1.5-2.5L lower power goals so you have good power throughout the rpm range. Pick Group B Turbines

Precision Turbo has a wide range of turbos to pick from. 5857 is 58mm cold side wheel with 57mm turbine hot side wheel. Larger wheels =more lag but higher air volume flow rates. The correct wheel size (= flow rate and spool rate) and your turbine AR (picked based on where you want your power in the band and engine displacement) The turbos are basically like Garrett units with advanced modifications from Precision Turbo here in Indiana. They cast alot of the compressor covers and turbine housings allowing lower prices and better performance. Prices start at about $825 and go up with billet wheels or ceramic ball bearing options. You will get a card you can send in for a standard 1yr warranty.  We are 2 hours from Precision right here in Indiana, if you want us to match a price for you just shoot us a email about the competitions offer.

Click Here to View a turbine choice sheet based on your group
Precision Turbo 5862
Precision Turbo 5862

Thrust bearing PT5862 turbocharger for about 615hp with the CEA billet wheel and ball bearing. Great for 1.5-2.5L moderate power goals so you have good power throughout the rpm range. Pick Group B Turbines

Precision Turbo has a wide range of turbos to pick from. 5862 is 58mm cold side wheel with 62mm turbine hot side wheel. Larger wheels =more lag but higher air volume flow rates. The correct wheel size (= flow rate and spool rate) and your turbine AR (picked based on where you want your power in the band and engine displacement) The turbos are basically like Garrett units with advanced modifications from Precision Turbo here in Indiana. They cast alot of the compressor covers and turbine housings allowing lower prices and better performance. Prices start at about $825 and go up with billet wheels or ceramic ball bearing options. You will get a card you can send in for a standard 1yr warranty.  We are 2 hours from Precision right here in Indiana, if you want us to match a price for you just shoot us a email about the competitions offer.

Click Here to View a turbine choice sheet based on your group
Precision Turbo 6262
Precision Turbo 6262

Thrust bearing PT6262 turbocharger for about 680hp with the CEA billet wheel and ball bearing as efficiency goes up. Great for 1.5-2.5L moderate power goals so you have good power throughout the rpm range. Pick Group C Turbines

Precision Turbo has a wide range of turbos to pick from. 6262 is 62mm cold side wheel with 62mm turbine hot side wheel. Larger wheels =more lag but higher air volume flow rates. The correct wheel size (= flow rate and spool rate) and your turbine AR (picked based on where you want your power in the band and engine displacement) The turbos are basically like Garrett units with advanced modifications from Precision Turbo here in Indiana. They cast alot of the compressor covers and turbine housings allowing lower prices and better performance. Prices start at about $825 and go up with billet wheels or ceramic ball bearing options. You will get a card you can send in for a standard 1yr warranty.  We are 2 hours from Precision right here in Indiana, if you want us to match a price for you just shoot us a email about the competitions offer.

Click Here to View a turbine choice sheet based on your group
Precision Turbo 6265
Precision Turbo 6265

Thrust bearing PT6265 turbocharger for about 700hp with the CEA billet wheel and ball bearing as efficiency goes up. Great for 1.5-2.5L moderate power goals so you have good power throughout the rpm range. Pick Group D Turbines

Precision Turbo has a wide range of turbos to pick from. 6265 is 62mm cold side wheel with 65mm turbine hot side wheel. Larger wheels =more lag but higher air volume flow rates. The correct wheel size (= flow rate and spool rate) and your turbine AR (picked based on where you want your power in the band and engine displacement) The turbos are basically like Garrett units with advanced modifications from Precision Turbo here in Indiana. They cast alot of the compressor covers and turbine housings allowing lower prices and better performance. Prices start at about $825 and go up with billet wheels or ceramic ball bearing options. You will get a card you can send in for a standard 1yr warranty.  We are 2 hours from Precision right here in Indiana, if you want us to match a price for you just shoot us a email about the competitions offer.

Click Here to View a turbine choice sheet based on your group
Precision Turbo 6765
Precision Turbo 6765

Thrust bearing Beast PT6765 turbocharger for about 755hp and then 900hp with the CEA billet wheel and ball bearing since efficiency goes up. Great for 2-3L higher power goals so you have good power throughout the rpm range. Pick Group D Turbines

Precision Turbo has a wide range of turbos to pick from. 6765 is 67mm cold side wheel with 65mm turbine hot side wheel. Larger wheels =more lag but higher air volume flow rates. The correct wheel size (= flow rate and spool rate) and your turbine AR (picked based on where you want your power in the band and engine displacement) The turbos are basically like Garrett units with advanced modifications from Precision Turbo here in Indiana. They cast alot of the compressor covers and turbine housings allowing lower prices and better performance. Prices start at about $900 and go up with billet wheels or ceramic ball bearing options. You will get a card you can send in for a standard 1yr warranty.  We are 2 hours from Precision right here in Indiana, if you want us to match a price for you just shoot us a email about the competitions offer.

Click Here to View a turbine choice sheet based on your group
Precision Turbo 5252
Precision Turbo 5252

Thrust bearing 5252 turbocharger for about 600hp - great for 1.5-2.5L mild power goals so you have good power throughout the rpm range. Pick Group B Turbines

59mm Compressor wheel and 62mm turbine wheel. Larger wheels =more lag but higher air volume flow rates. The correct wheel size (= flow rate and spool rate) and your turbine AR (picked based on where you want your power in the band and engine displacement) The turbos are basically like Garrett units with advanced modifications from Precision Turbo here in Indiana. They cast alot of the compressor covers and turbine housings allowing lower prices and better performance. You will get a card you can send in for a standard 1yr warranty.  We are 2 hours from Precision right here in Indiana, if you want us to match a price for you just shoot us a email about the competitions offer.

Click Here to View a turbine choice sheet based on your group
Precision Turbo 6069
Precision Turbo 6069

Thrust bearing 6069 turbocharger for about 605hp - great for 1.5-3L mild power goals so you have good power throughout the rpm range. Pick Group D Turbines

59mm Compressor wheel and 65mm turbine wheel. Larger wheels =more lag but higher air volume flow rates. The correct wheel size (= flow rate and spool rate) and your turbine AR (picked based on where you want your power in the band and engine displacement) The turbos are basically like Garrett units with advanced modifications from Precision Turbo here in Indiana. They cast alot of the compressor covers and turbine housings allowing lower prices and better performance. You will get a card you can send in for a standard 1yr warranty.  We are 2 hours from Precision right here in Indiana, if you want us to match a price for you just shoot us a email about the competitions offer.

Click Here to View a turbine choice sheet based on your group
Precision Turbo 6365
Precision Turbo 6365

Thrust bearing 6365 turbocharger for about 695hp - great for 1.5-3L mild power goals so you have good power throughout the rpm range. Pick Group E Turbines

63mm Compressor wheel and 65mm turbine wheel. Larger wheels =more lag but higher air volume flow rates. The correct wheel size (= flow rate and spool rate) and your turbine AR (picked based on where you want your power in the band and engine displacement) The turbos are basically like Garrett units with advanced modifications from Precision Turbo here in Indiana. They cast alot of the compressor covers and turbine housings allowing lower prices and better performance. You will get a card you can send in for a standard 1yr warranty.  We are 2 hours from Precision right here in Indiana, if you want us to match a price for you just shoot us a email about the competitions offer.

Click Here to View a turbine choice sheet based on your group