|
|
|
|
|
|
Mazda 323 B6T BP Turbo Manifold
|
Our Price: $749.00
|
|
|
Mazda Race turbo manifold for custom applications. Can be flanged for T25, T3, T4 or Vband for Precision or TiAL turbines. No wastegate is fine but we also offer Vband TiAL 38mm MVS or 44mm MVR flanged 323 manifold variations. Thanks to Jan in Germany we now offer the BP version for the 323.
|
|
|
|
|
|
|
|
|
|
|
|
|
Neukin RX7 13B Divided Topmount
|
|
Our Price: $795.00
|
|
|
Divided single wastegate topmount turbo manifold designed for the RX7 FC 86-92 chassis. Built with large 2" runners and 1.5" Y tube running to wastegate. 13B S5 This manifold works with our VMount kit (Large double pass radiator and Garrett core custom Neukin intercooler and pipes)
|
|
|
|
|
|
|
|
|
|
|
|
|
Neukin RX7 13B T4 Turbo Manifold
|
|
Our Price: $495.00
|
|
|
Single wastegate topmount manifold for open T4 turbos. This neukin manifold is designed for the RX7 FC 86-92 chassis. Built with large 2" runners and 1.5" tube running to wastegate. The TiAL 44mm vband flange needs no gasket and accepts the 44mm and others like the Synapse 50mm or Precision Turbo 46mm wastegate. Tested on 13B S5, might work with S4 intake manifolds. Fits large turbos like the GT40 or GT42 This manifold works with our VMount kit (Large double pass radiator and Garrett core custom Neukin intercooler and pipes)
|
|
|
|
|
|
|
|
|
|
|
|
|
Mazda RX7 FC V Mount Kit
|
|
Our Price: $1,199.00
|
|
|
Includes: Custom Neukin Intercooler (garrett bar/plate core), Double pass massive Neukin radiator, dual electric fans (terminals and wire included), 2 aluminum shroud/Brackets and steel frame. Hot Intercooler pipe with TiAL bov flange welded, couplers, and stainless t bolt clamps. Radiator hoses and clamps, inline coolent fill pipe with cap, Louver for hood, Sparco hood pins and latch and hardware for install. Some cutting needed to the upper radiator support, rectangle cut in hood and a few holes drilled. Best to use stock hood and cut our measured hood opening. Louver system drops right in and can be riveted with just two small rivets. Louver that ships fits right over core of intercooler and is open like our 240sx kit. The red car shows a custom unit that had gaps around the core. The tight fitment allows easy install. Email for more info!
Coolent temps on track 210dF and intake temps about 140dF, 13b 460whp and neukin manifold
|
|
|
|
|
|
|
|
|
|
|
|
|
Mazda RX7 FC Brake Duct
|
|
Our Price: $160.00
|
|
|
Custom Neukin Brake Duct Kit. The Mazda RX7 2nd gen FC has great brakes but after some track time you can easily overheat the rotor and pads resulting in fade. Track events have showed us these are a must at Mid Ohio and Road America. Brakes are among one of the most important race parts on your car... nothing feels better then being fully prepared. Slowing down for the apex from 160mph never felt so gooooood!
- Lowers brake temps by cooling rotors directly
- 6' Hightemp duct
- 2 aluminum brake duct plates with 3" tube tig welded
- 4 clamps
We dont offer anything for the front bumper to hose connection yet.
|
|
|
|
|
|
|
|
|
|
|
|
|
3 lb Light Race Car Battery and Charger fastbattery
|
|
Our Price: $349.00
|
|
|
Click picture to view more pics
Custom built by fastbattery.com we now sell their light weight 3 pound battery. Honda Civic battery is 27 lbs and metal tray is 2 lbs so just using this battery shaves 26 lbs off your car. Its 10 lbs lighter then the Deka most people use and 12 lbs lighter then a PC680. Using advanced lithium ion cells this battery is safe, non flammable, non combustable, will never leak, and is very small at 4.24x4.25x3 inch. With 280 cranking amps it starts your good condition engine system quickly. The PC680 thats very popular has 300 cranking amps so this is not a problem! The digital charger included can be connected in seconds with the quick connect terminals. If your buying a Deka or Braille for $150 your only $245 away from having some of the most advanced technology under your hood. Its 2011 get rid of the lead weights in your car! 1 year warranty
Larger AH units can be built by fastbattery.com if you need more capacity or more crank amps for V6 or V8 motors. Even 16volt configurations can be built. Shoot us a email sales@neukin.com
|
|
|
|
|
|
|
